DIGIWAVE - серия заваръчни машини

 

 

 

DIGIWAVE 500 - МИГ/МАГ заваръчни машини

 

pdficon DIGIWAVE 280 / 400SW /500SW

DIGIWAVE 280 / 400SW / 500SW - A user-friendly high level performance DIGIWAVE makes the ideal partner for all manual, automatic and robotic welding applications. The wide graphic screen allows the operator to navigate easily around the menu bar for parameter adjusting.

DIGIWAVE range the decisive advantages:
Control of aluminium welding: special equipments, adapted processes (SM: Spray Modal™), essential options for demanding applications 
  (reduction of micro porosity and increased penetration).
Regulation and numerical controls: total control of wave form alignment for process improvement and for     exact parameter reproduction.
Increased power (Voltage/Current): increase the arc rigidity with pulsed mode, which improves penetration and allow a good fusion with usually “hard-to-weld” wires.
More processes: Soft current, Pulsed, SSA, SSP, SM, CDP, MIG brazing, MMA, and PR Spray.
More memory: 115 welding synergies on DIGIWAVE 280 and 153 on DIGIWAVE 400/450W are available for all welding applications. These machines also include 100 programme memory selected via the wire feeder, remote control or DIGITORCH E range.
More controls: parameters monitoring, indication of the defects, parameters blocking on several levels, printing, 99 programs, calibration…
More cycles: 2T/ 4T/ Spot weld/Cold Double Pulse current (CDP).
More options: wide range for improved welding operations and applications.
Advanced torch “DIGITAL”.

 

 

 

DIGIWAVE 280 (with enclosed wire feeder)  
DIGIWAVE 280 is delivered with:
• 1 power source; 
• With enclosed wire feeder; 
• 5 m primary cable;
• 5 m earth cable and clamp with DINSE connector; 
• 2 m fitted gas hose;
• Accessory kit for solid wires 1.0 – 1.2 mm.
DIGIWAVE 280 - МИГ/МАГ заваръчни машини, инверторна технология

 

 

DIGIWAVE 400 SW  

DIGIWAVE 400 SW is delivered with:
• 1 power source; 
• 5 m primary cable;
• 5 m earth cable and clamp with DINSE connector; 
• Enclosed water cooling unit.

 


DIGIWAVE 400 SW - МИГ/МАГ заваръчни машини, инверторна технология

 

 

DIGIWAVE 500 SW  
DIGIWAVE 500 SW is delivered with:
• 1 power source; 
• 5 m primary cable;
• 5 m earth cable and clamp with DINSE connector;
• Enclosed water cooling unit.

DIGIWAVE 500SW - МИГ/МАГ заваръчни машини, инверторна технология

 

 

 

  DIGIWAVE 280  DIGIWAVE 400SW  DIGIWAVE 500SW 
 Power supply (+/- 10%)
50/60 Hz 
 400 V
Three phase
 400 V
Three phase
 400 V 
Three phase
 Primary effective consumption  21.4 A  29.8 A  38.9 A
 Primary consumption at I max.  31.4 A  34.5 A  45.2 A
 No-load voltage  113 V  113 V  113 V
 Welding current  20 A - 280 A  20 - 400 A  20 - 500 A
 Duty cycle (at 40 °C) 45%  -  400 A  -
 Duty cycle (at 40 °C) 60%  -  -  500 A
 Duty cycle (at 40 °C) 100%  280 A  350 A  440 A
 Inductance  Electronic  Electronic  Electronic
 Number of rollers  4  4  4
 Reverse polarity (gasless)  Yes  Yes  Yes
 Digital display  Yes  Yes  Yes
 Dimensions (L x W x H) 845x380x855 mm 845x380x855 mm 845x380x855 mm
 Weight  76 kg  91 kg  91 kg
 Proctection index  IP 23 S  IP 23 S  IP 23 S
 Proctection class  H  H  H
 Standard EN 60974-1 /
EN 60 974-10
EN 60974-1 /
EN 60 974-10
EN 60974-1 /
EN 60 974-10

 

 

DIGIWAVE 500SW panel 1 - МИГ/МАГ заваръчни машини           DIGIWAVE 500SW PANEL 2 - МИГ/МАГ заваръчни машини