FILCORD-серия компактни професионални машини за МИГ/МАГ заваряване

 FILCORD - пълна серия - Каталог 

 FILCORD C, FILCORD S/SW

Professional compact machines (enclosed wire feeder)
The FILCORD machine range is manufactured using quality electrical components to provide fast and positive wire feed response via a 4-roll drive (FILCORD 171C - 2 roll) system. Each machine offers smooth trouble free welding operation.

Five reasons to choose an installation from the FILCORD range: FILCORD is a new generation of MIG/MAG welding installations for welding professionals. The products from the FILCORD range will give you amazing welding performance at a reasonable price. All the experience of Air Liquide Welding is available to you in these installations so you can be sure of having made the right choice.

• Easy to use
FILCORD installations have characteristics which make them easy to use.
Using digital control of the wire speed, the machine always supplies the
correct quantity of wire at the appropriate speed. Furthermore, the priming
system is extremely powerful thanks to the “soft start” and “burn back”
systems. The digital parameter display lets you know immediately and
permanently whether you are welding under the best conditions.

• Welding performance
Units in the FILCORD range have been developed
to bring maximum performance in your applications.
You will obtain an extremely stable arc thanks
to the self-regulation of the wire feed speed, the 4-rollers
feeding system and voltage regulation.
The parameters can be very easily adjusted directly on the
front panel of the generator.

• The choice is yours
We have built a range of products to satisfy all
possible situations. Our large range of single-phase or three-phase
models, portable, with integral or separate wire feeder, enable you to choose
the product best suited to your work setup. A large choice of additional options are also available
to meet your requirements as closely as possible.

• A good investment
FILCORD is the best investment you could make. FILCORD
installations enable you to improve your productivity
at a price which suits you. In addition, the excellent
reliability of these machines enables you to work without
worrying about breakdowns.
The result is simple with FILCORD,
you have a lot more for less cost

• Safety
Welder safety is a priority for Air Liquide Welding and
we make no compromises in this regard. FILCORD
installations allow you to work under the safest conditions.
Our “security requirement” is initially expressed by compliance
with the strictest European standards and the low open-circuit
voltage of FILCORD generators.




 

FILCORD 171 C
6 decisive advantages: • Specialized in thin sheet, • User-friendly front panel, • 2T and spot modes, • EURO torch connector, • 2 roll wire feed, • 6 voltage steps.
Standard equipment: • 1 power source with wheels, • 1 cylinder holder, • 3 m primary cable, • Earth cable and clamp, • 2 m fitted gas hose, • 1 accessories kit for solid wire 0.6-0.8 mm.

FILCORD 203 C
6 decisive advantages: • User-friendly front panel, • 2T/4T and spot modes, • 4 roll wire feed, • Reverse polarity (gasless), • 7 voltage steps, • 2 inductance settings.
Standard equipment: • 1 power source with wheels, • 1 cylinder holder, • 3 m primary cable, • 5 m earth cable and clamp with DINSE connector, • 2 m fitted gas hose, • 1 accessories kit for solid wire 0.8-1.0 mm.

FILCORD 253 C
6 decisive advantages: • User-friendly front panel, • 2T/4T and spot modes, • 4 roll wire feed, • Reverse polarity (gasless), • 10 voltage steps, • 2 inductance settings.
Standard equipment: • 1 power source with wheels, • 1 ergonomic lower cylinder holder, • 1 upper cylinder support with torch rest, • 3 m primary cable • 5 m earth cable and clamp with DINSE connector • 2 m fitted gas hose, • 1 kit accessories for solid wires 0.8-1.0 mm.

FILCORD 303 C
Features: • User-friendly front panel, • 2T/4T and spot modes, • 4 roll wire feed, • Reverse polarity (gasless), • 2 x 7 voltage steps, • 2 inductance positions, • Digital display included.
Standard package: • 1 power source with wheels, • 1 ergonomic lower cylinder holder, • 1 upper cylinder support with torch rest, • 3 m primary cable, • 5 m earth cable and clamp with DINSE connector, • 2 m fitted gas hose, • 1 accessories kit for solid wire 0.8-1.0 mm.

FILCORD 353 C
Features: • User-friendly front panel, • 2T/4T and spot modes, • 4 roll wire feed, • Reverse polarity (gasless), • 3 x 7 voltage steps, • 3 inductance positions, • Digital display included.
Standard package: • 1 power source with wheels, • 1 ergonomic lower cylinder holder, • 1 upper cylinder support with torch rest, • 3 m primary cable, • 5 m earth cable and clamp with DINSE connector, • 2 m fitted gas hose, • 1 accessories kit for solid wire 1.0 -1.2 mm.

FILCORD 303 S
Features: • Power source with self, protected safety switches, • Separate wire feeder with digital display • 1 accessory kit for solid wires 1.0-1.2 mm, • User-friendly front panel, • 2T/4T and spot modes, • 4 roll wire feed, • 2 x 7 voltage steps, • 2 inductance settings.
Standard package: • 1 power source with handle and wheels, • 1 ergonomic lower cylinder holder, • 1 upper cylinder support with torch rest, • 3 m primary cable, • 5 m earth cable and clamp with DINSE connector, • 2 m fitted gas hose.

FILCORD 353 S / 353 SW
Features: • Power source with self protected safety switches, • Separate wire feeder with digital display, • 1 accessory kit for solid wires 1.0-1.2 mm, • User-friendly front panel, • 2T/4T and spot modes, • 4 roll wire feed, • 3 x 7 voltage steps, • 3 inductance settings.
Standard package: • 1 power source with handle and wheels, • 1 ergonomic lower cylinder holder, • 1 upper cylinder support  with torch rest, • 3 m primary cable • 5 m earth cable and clamp with DINSE connector • 2 m fitted gas hose.

FILCORD 453 S / 453 SW
Features: • Power source with self protected safety switchs, • Separate wire feeder with digital display, • 1 accessory kit for solid wires 1.0-1.2 mm, • User-friendly front panel, • 2T/4T and spot modes, • 4 roll wire feed, • 3 x 7 voltage steps, • 3 inductance settings.
Standard package: • 1 power source with handle and wheels, • 1 ergonomic lower cylinder holder, • 1 upper cylinder support with torch rest, • 3 m primary cable, • 5 m earth cable and clamp with DINSE connector, • 2 m fitted gas hose.