SAFMIG BLX серия МИГ/МАГ заваръчни машини



SAFMIG 400 BLX - индустриал МИГ/МАГ заваръчни машини

 

pdficon SAFMIG 300 BLX/ 400 BLX/ 500 BLX

The SAFMIG BLX range are conventional switched MIG-MAG welding installations with ESP help system setting. These units are equipped with digital wire speed regulation, maintaining a constant value in wire feed supply regardless of variations in resistance. This characteristic produces a perfectly stable arc for high quality defect free welds and excellent surface appearance.


Ten good reasons to choose SAFMIG BLX for industrial installations
1 - Robustness of SAFMIG BLX units guaranteed by qualified crash test.
2 - ESP (Electronic Setting Program) settings assistance to obtain the right welding parameters instantly.
3 - Quality of transformer and choke that guarantee exceptional welding of steel, stainless steel or aluminium.
4 - Control of ASC choke (Arc Striking Command) for instant arc strike with minimal spatter.
5 - Guaranteed duty cycle at 40 °C meeting industrial productivity requirements due to the optimized cooling of the SAFMIG BLX.
6 - Complete welding cycled controlled by microprocessor card for high flexibility.
7 - Numerically controlled wire feed is accurate and constant whatever the variations in mains supply or temperature.
8 - Display of parameters (voltage, current, speed) essential for the conformity of operating modes
9 - Enhanced reliability and life expectancy due to protection of switching equipment in a dust-proof compartment.
10 - Tested for HF immunity and endurance to enable operation in harsh industrial environments.

 

• Step controlled power source
The quality of a voltage-switching power generator depends primarily on the calibration and arrangement of the electromagnetic elements used in the construction of the generator. Only the experience gained from years developing this type of machine brings the perfect mastery of this calibration that optimizes arc transfer modes.

• Excellent welding quality
Built and calibrated to the highest standards, this type of machine guarantees excellent welding quality that will not vary over time and provides unrivalled durability that stands up to any challenge. Another essential advantage as regards process, compared with modern AC/DC inverter power sources, is that there is never a limit on instantaneous current, so that the power source delivers exactly the current that the process requires. This is highly advantageous when welding medium or thick aluminium.

Your expectations
Industrial products
• Tough and durable
• High duty cycle
• Complete welding cycle
• Low maintenance

Easy to use
• Ready to use
• Setting assistance program to find the right parameters quickly
• Compact, mobile wire feed unit

High level of welding quality
• High-performance Short Arc (minimal spatter)
• Welds aluminium 3 mm thick
• Good arc striking and excellent repeatability
• Optimum wire feed for a stable arc
and a regular bead

 

SAFMIG 300 BLX / BLX S  
Features: 
• User-friendly front panel,
• Pre-gas, post-gas and burn-back times adjustment,
• ESP mode to adjust easily the welding parameters,
• Digital display,
• 2T/4T, spot and intermittent modes,
• 4 roll wire feed,
• Reverse polarity(gasless),
• 12 voltage steps,
• 2 inductance settings,
• Fan on demand,
• Digital wire speed regulation,
• Saturable inductance,
• Spatter reduction system.
SAFMIG 300 BLX - индустриал МИГ/МАГ заварчъни машини
Standard package:
• 1 power source with wheels, cylinder  support and handle,
• 5 m primary cable,
• 5 m earth cable and clamp with  DINSE connector,
• 2 m fitted gas hose,
• 1 accessory kit for solid wires
1.0 -1.2 mm.
 

 

 

 

SAFMIG 400 BLX / BLX S / BLX W / BLX SW  
Features:
• User-friendly front panel,
• Pre-gas, post-gas and  burn-back times adjustment,
• ESP mode to adjust easily  the welding parameters,
• Digital display,
• 2T/4T, spot and intermittent modes,
• 4 roll wire feed,
• Reverse polarity(gasless),
• 3 x 10 voltage steps,
• 2 inductance settings,
• Fan on demand,
• Digital wire speed regulation,
• Saturable inductance,
• Spatter reduction system.
SAFMIG 400 BLX - индустриал серия МИГ/МАГ заваръчни машини
Standard package:
• 1 power source with wheels, cylinder  support and handle,
• 5 m primary cable,
• 5 m earth cable and clamp with  DINSE connector,
• 2 m fitted gas hose,
• 1 accessory kit for  solid wires 1.0 -1.2 mm.
 

 

 

 

SAFMIG 500 BLX S / BLX SW  
Features:
• User-friendly front panel,
• Pre-gas, post-gas and burn-back times adjustment,
• ESP mode to adjust easily the welding parameters,
• Digital display,
• 2T/4T, spot and intermittent modes,
• 4 roll wire feed,
• Reverse polarity (gasless),
• 3 x 10 Voltage steps,
• 2 inductance settings,
• Fan standby,
• Digital wire feed regulation,
• Inductance,
• Spatter reduction system.
SAFMIG 500 BLX - индустриал МИГ/МАГ заваръчни машини
Standard package:
• 1 power source with wheels,  cylinder support and handle,
• 5 m primary cable,
• 5 m earth cable and clamp with DINSE connector,
• 2 m fitted gas hose,
• Accessory kit for 1.0-1.2 mm  solid wire,
• Enclosed cooling unit  (for the SW version).
 

 

 

                

 

 

 

  SAFMIG 300 BLX  SAFMIG 400 BLX  SAFMIG 500 BLX 
 Power supply (+/- 10%)
50/60 Hz 
230 V / 400 V
Three phase
230 V / 400 V
Three phase
230 V / 400 V
Three phase
 Primary effective consumption 20.5 A / 12 A 30.4 A / 17.6 A 44.9 A / 25.9 A
 Primary consumption at I max. 27.7 A / 16 A 47 A / 27 A 63 A / 36 A
 No-load voltage 16.5 - 35.8 V 16.6 - 45.8 V 15.8 - 50.4 V
 Welding current 30 to 280 A 28 to 380 A 16 to 480 A
 Duty cycle (at 40 °C) 45% 270 A 380 A (at 40%) 480 A (at 50%)
 Duty cycle (at 40 °C) 60% 240 A 320 A 410 A
 Duty cycle (at 40 °C) 100% 200 A 280 A 350 A
 Adjustment voltage steps 12 30 30
 Inductance settings 1 2 2
 Number of rollers 4 4 4
 Reverse polarity (gasless) Yes Yes Yes
 Digital display Yes Yes Yes
 Dimensions (L x W x H) 390x780x825 mm 925x580x1 060 mm 925x580x1 060 mm
 Weight 101 kg 161 kg 201 kg
 Proctection index IP 23 IP 23 IP 23
 Proctection class H H H
 Standard EN 60974-1 EN 60974-1 EN 60974-1