PRESTO PFC-серия заваръчни машини за електронно инверторно ММА заваряване



PRESTO 140PFC - ММА заваряване

 

presto-specmarks

pdficon PRESTO 140PFC / 160PFC / 180PFC - Каталог

• Improved generator compatibility with PFC controller addition.        (PFC - Power Factor Control)
• Hot start and anti-stick functions.
• Reduced noise. Intelligent cooling fan.
• Ergonomic handles for carrying and cable rolling.
• Usable with long primary extension cable
   (70 m in 2.5 mm 2 section).
• Lightweight - 6.6 kg.

 

 

 PRESTO PFC - ММА заваряване                PRESTO PFC - ММА заваряване

The PRESTO PFC range is fitted with the new SAF-FRO inverter technology. The PFC controller is the technical solution to achieve conformance to the limitation of the harmonic current for equipment connected to public low voltage network which is now mandatory in Europe (EN 61000 - 3 -12 standard). PFC results in lower effective current consumption at the same output welding power, also maximising electronic component lifetime.

 

 

  PRESTO 140 PFC PRESTO 160 PFC PRESTO 180 PFC
Power supply single phase 50/60 Hz 230 V
(+15% /-20%)
230 V
(+15% /-20%)
230 V
(+15% /-20%)
Primary effective consumption 12 A 15 A 15 A
Primary consumption at I max. 18.5 A 21.5 A 25 A
No-load voltage 48.4 V 48.4 V 48.4 V
Welding current 5 - 140 A 5 - 160 A 5 - 180 A
Duty cycle 10 min. cycle(at 40 °C) at 35% 140 A (40%) 160 A (30%) 180 A (20%)
Duty cycle 10 min. cycle(at 40 °C) at 60% 120 A 140 A 140 A
Duty cycle 10 min. cycle(at 40 °C) at 100% 100 A 120 A 120 A
Electrode diameter 1.6 to 3.2 mm 1.6 to 4.0 mm 1.6 to 4.0 mm
Connector diameter 9 mm 9 mm 9 mm
Dimensions (L x l x h) 320 x 170 x 395 mm 320 x 170 x 395 mm 320 x 170 x 395 mm
Weight 6.6 kg 6.6 kg 6.6 kg
Protection class IP 23 IP 23 IP 23
Insulation class H H H
Standards EN 60974-1 / EN 60974-10 EN 60974-1 / EN 60974-10 EN 60974-1 / EN 60974-10

 

 

PRESTO 180PFC control panel - ММА заваряване              PRESTO 180PFC - ММА заваряване